x
 » Ampacoll A Tape black

Ampacoll A Tape black
Neu

Non-combustible, glass-fibre-reinforced black adhesive tape

Product photo: Ampacoll A Tape black, non-combustible, glass-fibre-reinforced black adhesive tape
Application photo: Ampacoll A Tape black, non-combustible, glass-fibre-reinforced black adhesive tape
Application photo: Ampacoll A Tape black, non-combustible, glass-fibre-reinforced black adhesive tape

UV-stable, repositionable adhesive tape with a low-combustion-load special adhesive and glass-fibre mesh.

  • Fire behaviour: A2-s1, d0*
  • System adhesive tape for Ampatop® A black
  • UV-stable
  • Moisture resistant, for exterior use
  • Glass-fibre-reinforced, dimensionally stable
  • Completely black – without overprinting
  • Easily repositionable

*with max. 10% adhesive tape coverage of area

UV-stable, repositionable adhesive tape with a low-combustion-load special adhesive and glass-fibre mesh. Removable silicon paper liner. System adhesive tape for bonding the non-combustible, diffusion-permeable black membrane Ampatop A black for ventilated façades and roofs.


10 Jahre Ampack Garantie

ISO 9001

Item no.Roll sizeBox contents
764044209217625 m × 75 mm6 rolls = 150 m
Property Value Standard

Storage

cool and dry

Durability

> 20 years

Operating temperature for product

5 °C and above

Temperature resistance

–30 °C to 90 °C

Outdoor weathering

9 months (before installation of the façade surfacing)

UV stability

> 10 years
Technical data sheets
pdf Technical data sheet: Ampacoll A Tape black Technical data sheet: Ampacoll A Tape black, non-combustible, glass-fibre-reinforced black adhesive tape
Advertising media
pdf Folder: Non-combustible assortment Folder: Non-combustible assortment
Product photos
jpg Product photo: Ampacoll A Tape black Product photo: Ampacoll A Tape black, non-combustible, glass-fibre-reinforced black adhesive tape
Application photos
jpg Application photo: Ampacoll A Tape black Application photo: Ampacoll A Tape black, non-combustible, glass-fibre-reinforced black adhesive tape
jpg Application photo: Ampacoll A Tape black Application photo: Ampacoll A Tape black, non-combustible, glass-fibre-reinforced black adhesive tape

Bonding overlapping materials
Clean the surfaces and/or base to be bonded as necessary. Cut the Ampacoll A Tape black to the desired length and position it centrally over the overlap. To ensure longlasting adhesion, it is essential to observe the recommended application temperature, rub the adhesive tape down firmly and allow a setting time of at least 24 hours. 

Bonding of penetrations
When taping over penetrations such as outlet vents, etc., place the Ampacoll A Tape black overlapping onto the penetration and rub down to fix firmly. 

Special instructions 
For the adhesive tape to function, counter battening is necessary to safeguard subsequent work and to avoid possible weather damage (e.g. wind suction and pressure). We recommend that the façade lining is covered as quickly as possible. However, the lining must be installed no later than the end of the permitted natural weathering period. The width of the joint can be up to 5 cm. The individual façade lining elements must be at least the same width. Max. 10 % adhesive tape coverage of area (for fire behaviour: A2-s1, d0).

Back to overview