Ampacoll A Tape silver
Neu
Non-combustible, fabric-reinforced reflective aluminium adhesive tape
Tearproof, fabric-reinforced adhesive tape with low-combustion-load special adhesive for interior and exterior use.
- Fire behaviour: A2-s1, d0*
- System adhesive tape for Ampatop A silver plus and Ampatex A primo plus
- UV-stable
- Moisture resistant, for exterior use
- Fabric-reinforced, dimensionally stable
- Reflective surface made of aluminium foil
- Hand-tearable
*with max. 10 % adhesive tape coverage of area
Tearproof, fabric-reinforced adhesive tape with low-combustion-load special adhesive for interior and exterior use. Removable silicon paper liner. System adhesive tape for installing the non-combustible membranes Ampatop A silver plus and Ampatex A primo plus.
| Item no. | Roll size | Box contents |
|---|---|---|
| 7640442092176 | 25 m × 75 mm | 6 rolls = 150 m |
| Property | Value | Standard |
|---|---|---|
|
Storage |
cool and dry | |
|
Durability |
> 20 years (under covering) | |
|
Operating temperature for product |
+5°C and above | |
|
Temperature resistance |
– 40 °C to + 90 °C | |
|
Outdoor weathering |
9 months (before installation of the lining) | |
|
Emissivity |
5 % |
|
|
Reflexivity |
95 % |
Technical data sheets
|
Technical data sheet: Ampacoll A Tape silver | Technical data sheet: Ampacoll A Tape silver, non-combustible, fabric-reinforced reflective aluminium adhesive tape |
Advertising media
|
|
Folder: Non-combustible assortment | Folder: Non-combustible assortment |
Product photos
|
Product photo: Ampacoll A Tape silver | Product photo: Ampacoll A Tape silver, non-combustible, fabric-reinforced reflective aluminium adhesive tape |
Application photos
|
|
Application photo: Ampacoll A Tape silver | Application photo: Ampacoll A Tape silver, non-combustible, fabric-reinforced reflective aluminium adhesive tape |
|
|
Application photo: Ampacoll A Tape silver | Application photo: Ampacoll A Tape silver, non-combustible, fabric-reinforced reflective aluminium adhesive tape |
The surfaces to be bonded must be clean, dry and free of dust and grease. The ambient temperature, the surface temperature and the temperature of the adhesive tape must correspond to the indicated processing temperature. Installed membranes should be tension-free and even. The adhesive tape must be applied tension-free and rubbed down firmly, conforming to any unevenness of the surface beneath.
Ampacoll A Tape silver is largely resistant to standard weather conditions for up to nine months. Mechanical loads caused by objects being dragged around, intensive walking or similar must be avoided. To be used in conjunction with the non-combustible membranes Ampatop A silver plus and Ampatex A primo plus. Max. 10 % adhesive tape coverage of area (for fire behaviour: A2-s1, d0).
