x
 » Ampacoll BK 530 20 mm

Ampacoll BK 530 20 mm

Double-sided butyl rubber strip

Product photo: Ampacoll BK 530 20 mm, double-sided butyl rubber strip
Application photo: Ampacoll BK 530 15 mm, double-sided butyl rubber strip

Double-sided butyl rubber strip to tape wall membranes, vapour checks and vapour barriers.

  • Vapour-barrier properties
  • High quality butyl
  • > 300 % elasticity
  • Smoothes uneven surfaces
  • Chlorine-resistant
  • Permanently elastic, does not become brittle

Double-sided butyl rubber strip to tape wall membranes, vapour checks and vapour barriers. Also, almost any connections on wood, masonry, concrete, metal, etc. are easy to carry out and durable. Use a primer if necessary!

Einsatzbereich

Ampacoll BK 530, 20 mm:
Double-sided butyl rubber strip to tape wall membranes, vapour checks and vapour barriers. Also, almost any connections on wood, masonry, concrete, metal, etc. are easy to carry out and durable. Use a primer if necessary!


20-year Ampack premium warranty

Conditions for the twenty-year premium warranty include registering the building object and the Ampack products used. In addition, our products must be used as part of a system. For further details, please see our General Warranty Conditions.

ISO 9001

Article number Roll dimensions Carton content

7640115532985

25 m × 20 mm × 2 mm

8 rolls = 200 m

Property Value Standard

Storage

cool and dry

Durability

> 20 years

Operating temperature for product

above 0 °C

Temperature resistance

-40 to +90 °C

Outdoor weathering

3 months
Technical data sheets
pdf Technical data sheet: Ampacoll BK 530 Technical data sheet: Ampacoll BK 530, double-sided butyl rubber strip
Product photos
jpg Product photo: Ampacoll BK 530 20 mm Product photo: Ampacoll BK 530 20 mm, double-sided butyl rubber strip
Application photos
jpg Application photo: Ampacoll BK 530 Application photo: Ampacoll BK 530, double-sided butyl rubber strip

The surfaces to be sealed must be clean, dry, and free of dust and grease. Ampacoll BK 530 seals instantly on the substrate. Stripping the tape from the substrate is only possible to a limited extent. Please note that the staggering of the overlaps must be properly prepared before sealing. When sealing edge connections of wall membranes, vapour check and barriers on porous or dirty surfaces such as concrete, brick, untreated wood, etc., Ampacoll BK 530 should be used with Ampacoll Primax
or Ampacoll Airmax.

Back to overview