x
 » Ampacoll Profix

Ampacoll Profix
New

Liquid adhesive

Product photo: Ampacoll Profix cartridge, liquid adhesive
Application photo: Ampacoll Profix cartridge, liquid adhesive
Application photo: Ampacoll Profix cartridge, liquid adhesive
Application photo: Ampacoll Profix cartridge, liquid adhesive

Solvent-free, airtight, windtight, durable elastic liquid adhesive.

  • Permanently elastic and tacky
  • Ideal for TPU products and many other, sometimes tricky surfaces
  • Resistance against condensation and run-off water
  • No primer necessary
  • Repositionable
  • Notched nozzle for a more even bead

Solvent-free, airtight, windtight, durable elastic liquid adhesive. Ideally suited for bonding TPU sheeting, connecting a membrane to the eaves flashing, lining overlaps on wind seals, and mounting wind seals on metal sections.

Areas of application

Solvent-free, airtight, windtight, durable elastic liquid adhesive. Ideally suited for bonding TPU sheeting, connecting a membrane to the eaves flashing, bonding overlaps on façade sheeting, mounting façade sheeting on metal sections and connecting to building structures. The liquid adhesive sticks to many other, sometimes tricky surfaces such as PE, PP, EPDM, PVC, TPU and bitumen surfacing. It also levels off irregular surfaces on the building structure (bricks, stone, concrete, plaster, wood, MDF/OSB boards, etc.).


Article numberContentsBox contentsPallet contents
7640442090417290 ml / cartridge12 cartridges130 boxes
Property Value Standard

Storage

frost-free, cool and dry

Durability

> 20 years

Setting time

Two to three days

Solvent

solvent-free

Consumption

30 - 50 ml/m

Operating temperature for product

+ 5 to + 35 °C

Temperature resistance

– 40 to + 90 °C

Operating temperature underground

+ 5 to + 35 °C
Technical data sheets
pdf Technical data sheet: Ampacoll Profix Technical data sheet: Ampacoll Profix, liquid adhesive
Safety data sheets
pdf Safety data sheet: Ampacoll Profix Safety data sheet: Ampacoll Profix, liquid adhesive
Product photos
jpg Product photo: Ampacoll Profix Product photo: Ampacoll Profix, liquid adhesive
Application photos
jpg Application photo: Ampacoll Profix Application photo: Ampacoll Profix cartridge, liquid adhesive
jpg Application photo: Ampacoll Profix Application photo: Ampacoll Profix cartridge, liquid adhesive
jpg Application photo: Ampacoll Profix Application photo: Ampacoll Profix cartridge, liquid adhesive

Video: Ampacoll Profix

The substrate or surface must be sound, clean, dry and free of dust and grease. Continuously apply an 8 to 10 mm thick bead
to the substrate. Any dimples should be evened out with additional material. Roof membranes or wind seals should be lightly pressed onto the bead, without pressing it flat.

Drying time 2 – 3 days. A short airing time improves the initial bonding.

Back to overview