x
 » Ampatop Aero (plus)

Ampatop Aero (plus)

Wall membrane

Product photo: Ampatop Aero (plus), roof membrane

Triple layer, highly tear-resistant wall membrane.

  • Diffusion-open yet wind-proof
  • Cutting and orientation aid
  • Ampatop Aero plus: integrated tapes on both sides

Triple layer, highly tear-resistant wall membrane. PP fleece with coating.


10 Jahre Ampack Garantie

CE 13859-2:2014

ISO 9001

Article number Description Roll dimensions

7640115533821

Ampatop Aero

1,5 m × 50 m = 75 m2

7640115534798

Ampatop Aero plus
integrated tapes on both sides

1,5 m × 50 m = 75 m2

7640115535542

Ampatop Aero

3,0 m × 50 m = 150 m2

7640115535566

Ampatop Aero plus
integrated tapes on both sides

3,0 m × 50 m = 150 m2

Property Value Standard
Harmonised European Standard EN 13859-2:2014

Mass per unit area

145 g/m2

EN 1849-2

Straightness

< 30 mm/10 m

EN 1848-2

Fire behaviour

E EN 13 501-1 / EN ISO 11925-2

Resistance to water penetration

W1 EN 1928

Water vapour permeability, sD value

0,04 m EN 1931

Width of overlap

10 cm

Temperature resistance

-40 to +80 °C

Maximum tensile strength longitudinal / transverse

240 / 180 N/5 cm

EN 12 311-2, without support liner EN 13 859-1, Appendix A, with support liner

Elongation longitudinal / transverse

65 / 40 %

EN 12 311-2, without support liner EN 13 859-1, Appendix A, with support liner

Resistance to tearing (nail) longitudinal / transverse

145 / 185 N

EN 12 310-1 without support liner EN 13 859-1, Appendix B, with support liner

Cold bending behaviour (flexibility)

-20 °C EN 1109
approved Driving rain test TU Berlin

Outdoor weathering

3 months
Visible defects none EN 1850-2
Values after artificial ageing

Maximum tensile strength longitudinal / transverse

240 / 180

EN 13859-1, appendix C, EN 1297, EN 1296

Elongation longitudinal / transverse

240 / 180

EN 13859-1, appendix C, EN 1297, EN 1296

Resistance to water penetration

W1 EN 13859-1, appendix C, EN 1297, EN 1296
Technical data sheets
pdf Technical data sheet: Ampatop Aero (plus) Technical data sheet: Ampatop Aero (plus), roof membrane
Declarations of performance
pdf Declaration of perfomance: Ampatop Aero 1,5 x 50 m Declaration of perfomance: Ampatop Aero 1,5 x 50 m, roof and wall membrane
pdf Declaration of perfomance: Ampatop Aero plus Declaration of perfomance: Ampatop Aero plus 1,5 x 50 m, roof membrane, integrated tapes on both sides
pdf Declaration of perfomance: Ampatop Aero Declaration of perfomance: Ampatop Aero 3,0 x 50 m, roof membrane
pdf Declaration of perfomance: Ampatop Aero plus Declaration of perfomance: Ampatop Aero plus 3,0 x 50 m, roof, integrated tapes on both sides
Product inserts
pdf Product insert: Ampatop Aero Product insert: Ampatop Aero 1,5 x 50 m, roof membrane
pdf Product insert: Ampatop Aero plus Product insert: Ampatop Aero plus 1,5 x 50 m, roof membrane, integrated tapes on both sides
pdf Product insert: Ampatop Aero Product insert: Ampatop Aero 3,0 x 30 m, roof membrane
pdf Product insert: Ampatop Aero Product insert: Ampatop Aero 3,0 x 50 m, roof membrane
pdf Product insert: Ampatop Aero plus Product insert: Ampatop Aero plus 3,0 x 50 m, roof membrane, integrated tapes on both sides
Tendering texts
pdf Tendering text: Ampatop Aero (plus) Tendering text: Ampatop Aero (plus), roof and wall membrane, use as membrane for roof
Product photos
jpg Product photo: Ampatop Aero (plus) Product photo: Ampatop Aero (plus), roof membrane

Ampatop Aero (plus) should be laid onto the existing support structure or shell, parallel to the eaves, with an overlap of  10 cm. It should then be nailed (with broad-headed nails) or stapled in the overlapping section, with the overlap covering  the nails or staples. Tape the overlaps down with the adhesive tape Ampacoll XT 60 mm or the integrated tapes to make  them rain-proof and wind-proof. Rub the adhesive locations in well. Transverse joints should also overlap by 10 cm.  These should be taped with Ampacoll Superfix or Ampacoll XT 60 mm. Fix cross battens with Ampacoll ND nail seals or Ampacoll ND.Band / ND Duo nail seal tape. Connections to gutter beds and the edges of chimneys, dormer  windows and other built-in fitments must be permanently glued with Ampacoll Superfix and mechanically secured. Penetration points  such as ventilation shafts, ventilation flues, etc must be sealed with Ampacoll BK 535 butyl rubber tape. Porous, dusty or fleecy sub-surfaces must be pretreated with Ampacoll® Primax or Airmax before applying Ampacoll BK butyl tapes.

Back to overview